If the content of coarse particles in the crushed materials is high, or the ratio of the feeding block to the width of the feeding port is large, the crushing ratio (the ratio of the particle size of the materials before crushing to the particle size of the materials after crushing) of the hammer crusher is large, so the productivity decreases; the content of fine particles in the crushed materials (close to or less than the size of the discharge port) is large, or the ratio of the feeding block to the width of the feeding port is large When the ratio of feed mouth width is small, the crushing ratio will be small, so the productivity will be improved accordingly.

 

If the feed particle size is large and the discharge particle size is small, it often needs two-stage crushing or many stages crushing. If the particle size of the broken material is small, multi-stage crushing is generally not required. Jaw hammer crusher and partial hammer hammer crusher are generally used as primary crushing, while impact hammer crusher, cone hammer crusher, roller hammer crusher and hammer hammer crusher are generally used as secondary crushing or even tertiary crushing.

 

output value

 

Output value is also an important goal of crushing equipment. It is generally understood that the higher the output value is, the larger the crushing equipment standard is, and the corresponding input and output will be added. At present, the output value of hammer crusher on the market is less than 10 tons per hour, but more than hundreds of thousands of tons. Customers should choose what kind of equipment and how to organize the production line according to their own detailed requirements, which is more reasonable. Jingjiang Weineng machinery has higher cost performance.