The large-scale lemon oil grinder has the advantages of new and compact structure, energy saving and large production capacity.

2、 Operation principle

Operation principle: when the lemon enters the hopper, Under the effect of uniform fruit turning claw, it evenly enters into the oil grinding bin, and under the effect of several spiny oil grinding rods, it rolls and conflicts with the oil cells on the surface of lemon, and together under the effect of spiny hollow screw, it is transported to the discharge port; moreover, the machine is equipped with a spray pipe above the hollow screw, which can reduce the viscosity between lemon and lemon after the oil on orange is washed away by the water from the spray pipe It is convenient for the lemon to roll, and the oil can flow into the oil collecting bucket smoothly. In order to avoid the blockage of the spray hole, Jingjiang Weineng machinery installed stainless steel wire brush in the spray pipe to dredge the spray hole in time.

3、 Precautions

1. Tighten the bolts on the whole machine. The whole machine is checked and leveled.

2. Each smooth part should be smooth and excellent, and add the smooth oil with regular label.

3. Stones, screws and things are not allowed to fall into the oil mill.

4. Often check whether the motor overload heating, found bad phenomenon, it is necessary to contact repair personnel.

5. Every 100 hours of operation, add a smooth agent, to the appropriate amount, found that the smooth grease is dirty, discoloration, should immediately find out the cause. The normal operating temperature of bearing is less than 85oc

6. Keep the whole machine clean inside and outside.