The juicer is easy to operate and has safety protection function. Due to the high-speed rotation of the juicer, it will bring some danger. Therefore, we must pay attention to the protection design of juicer. The juicer is generally equipped with locking device. When the accessories are not installed in place, the machine can not work. When the accessories are not installed, carefully start the power supply and check whether the machine is equipped with locking device.

 

Second, cleaning the juicer is simple and easy to operate. Because it is often used to extract juice, it will leave a lot of residues in the juicer. For a healthy diet, cleaning becomes very important. A good Juicer should be very simple, convenient and clean quickly.

 

Third, the function of juicer. A good Juicer mainly depends on the effect of juicing. A good Juicer should squeeze the juice thoroughly, and the fruit residue contains less water. This can be demonstrated live by a salesperson. After Zui, a variety of different fruit experiments were selected. Only in this way can we really test the juicing ability of the juicer.

 

Fourth, all parts of the juicer should be of high quality, especially the blades and other parts. These are the core components of the juicer to check the quality. The quality is durable and parts will not be replaced frequently. You can offer more. Let the sales staff provide more.

 

Fifth, the speed of the juicer must be uniform and slow, at least less than 100 rpm, 70 rpm to the left and 90 rpm to the left. When the juicer rotates, there is no noise and the vibration is very small. Whether the switch can stop immediately.

 

Sixth, the shell of coconut Juicer manufacturers is mostly better. Because it's full of our drinks, the plastic for the juicer has to be clean. Make sure that the plastic of the juicer doesn't give off the smell of plastic, which is to ensure human health.

 

Seventh, do not directly flush the main engine with water.

 

Eighth, do not touch the built-in switch with your hand before installing the cup.

 

Ninth, the combination of blade and cup should be fully tightened, otherwise there will be water leakage, cup drop and other risks.