Cucumber crushing and juicing machine is a kind of universal crushing and juicing equipment for fruits and vegetables, which is widely used in many food processing industries. If you want to buy Wumart's high price cucumber crushing juicer, you can come to our company to have a look. It has many functions and models. There is always one that suits your needs. The following introduces the characteristics, structure and equipment principle of our cucumber crushing and juicing machine.

Application and scope of cucumber crushing and juicing machine

 

It is used for pressing pineapple, apple, pear and other fruits;

 

It is used for pressing mulberry, grape, orange, orange and other berries;

 

It is used for pressing vegetables such as tomato, ginger, garlic and celery.

 

Structure of crushing and juicing machine of cucumber Jingjiang Weineng machinery

Cucumber crushing and juicing machine is composed of front support, feed hopper, screw, filter screen, juice container, rear support, slag trough, etc. the left end of screw spindle is supported in rolling bearing seat, the right end is supported in handwheel bearing seat, and the motor drives screw to work through a pair of V-belts.

 

Working principle of cucumber crushing and juicing machine

 

The main component of the equipment is the screw. The bottom diameter of the screw increases gradually along the direction of the slag outlet, while the screw pitch decreases gradually. When the material is pushed by the screw, due to the reduction of the volume of the screw cavity, the material is squeezed and juiced.

 

The rotation direction of the screw spindle is clockwise from the hopper to the slag groove.

 

The raw materials are added into the feeding hopper and pressed under the push of the screw. The squeezed juice flows into the juice container at the bottom through the filter screen, while the slag is discharged through the annular gap formed between the screw and the conical part of the pressure regulator. The pressure regulator moves along the axial direction to adjust the size of the gap. When the hand wheel bearing seat is turned clockwise by hand (from the slag chute of the equipment to the hopper end), the pressure regulator head will turn to the left, and the gap will be reduced; otherwise, the gap will be increased. The juice yield can be changed by changing the pore size, that is, adjusting the resistance of slag discharge. However, if the pore is too small, under strong extrusion, part of the slag particles will be extruded together with the juice through the filter screen. Although the juice yield increases, the quality of the juice decreases relatively. Therefore, the pore size should be determined according to the specific process requirements of users.