Experience of commercial spinach crushing and juicing machin

Time:2021-04-07 11:36  Browse:277


There are many kinds of
spinach juicer, the household is the general small fruit and vegetable juicing equipment. The main component is the crushing device installed on the feed hopper (composed of feed hopper, body, main shaft, flying knife, bottom knife, bearing seat, motor, etc.) When the motor works, a pair of pulleys drive the spindle to rotate at the same speed, and the material is chopped by the high-speed rotating flying knife. Due to the centrifugal force, it directly enters the screw juicing system, so as to improve the juicing effect. The main component of Jingjiang Weineng mechanical screw juicing is the screw. The bottom diameter of the screw increases gradually along the direction of the slag outlet, while the pitch decreases gradually. When the material is pushed by the screw, the volume of the screw cavity decreases, forming the pressing of the material. The rotation direction of the screw spindle is clockwise from the hopper to the slag groove. The raw material is added into the feeding hopper and pressed under the push of the screw. The squeezed juice flows into the juice container at the bottom through the filter screen, while the waste material is discharged through the annular gap formed between the screw and the pressure regulating conical part. The movement of the pressure regulating head along the axial direction can adjust the size of the gap and the juice yield.