How to crush Apple Juicer?
Time：2021-04-07 12:07 Browse：277
Operation principle of Apple Juicer:
The crushed pulp, juice and peel enter the screw Juicer through the feed hopper, because the bottom diameter of the screw gradually increases along the direction of the slag outlet and the screw pitch gradually decreases. When the material is pushed by the screw, the volume of the screw cavity is reduced, forming the pressing of the material. The rolling direction of the screw spindle of Jingjiang Weineng machinery is clockwise from the feeding hopper to the slag trough. The material enters into the feeding hopper and is pressed under the push of the screw. The squeezed juice flows into the juice container at the bottom through the filter screen, while the waste material is discharged through the annular space formed between the screw and the pressure regulating conical part. The size of the space can be adjusted by moving the pressure regulating head along the axial direction. It is used clockwise (when the bearing seat of the rolling hand wheel is viewed from the slag chute of the equipment to the feed hopper end, the pressure regulator head will turn to the left, and the gap will shrink, otherwise, the space will become larger.) Changing the size of the empty space, that is, adjusting the resistance of the slag discharge, can change the slag rate. But if the empty space is too small, under the vigorous kneading, some slag particles and juice will be extruded through the filter together. Although the juice is added, the quality of the juice is relatively reduced. The size of the empty space should depend on the user's detailed process requirements. And then reach the intention that juice and dregs take the initiative to leave.