It's not easy to remove the grape stem, especially in the fruit and vegetable processing food factory. What should we do when facing so many grapes? Of course, you can choose a fruit crusher to remove the grape stem. Jingjiang Weineng machinery's stem crusher is a special stem crusher for grapes and other fruits.

 

The crushed pulp, juice and peel enter the screw Juicer through the feed hopper, because the bottom diameter of the screw gradually increases along the direction of the slag outlet and the screw pitch gradually decreases. When the material is pushed by the screw, the volume of the screw cavity is reduced, forming the pressing of the material. The rolling direction of the screw spindle is clockwise from the hopper to the slag groove. The grapes join in the feeding hopper and are pressed under the push of the screw. The squeezed juice flows into the juice container at the bottom through the filter screen, while the waste material is discharged through the annular space formed between the screw and the pressure regulating conical part. The size of the space can be adjusted by the movement of the pressure regulating head along the axial direction. It is used in clockwise direction (when the bearing seat of rolling hand wheel is viewed from the slag chute of the equipment to the feed hopper end, the pressure regulating head is to the left, and the empty space is reduced, otherwise, the empty space is increased.) We can customize the size and quality of wine making equipment according to our own sales volume and wine making capacity, but we should pay attention to the selection of equipment, and we must see the plate used personally. Don't buy equipment made of defective stainless steel and products that don't conform to regulations. This will not only make good wine, but also affect your health.