The equipment and technology of fast beating machine are advanced with high degree of automation. It can change the size from low concentration to high concentration, with fast concentration improvement, high ash removal rate and high pulp washing efficiency; it can effectively remove ink particles, fillers and other fine impurities, and improve the brightness of the size. Because of its simple structure, small footprint and high efficiency, it has been widely used in deinked pulp treatment system. What are the characteristics of Jingjiang Weineng's refined beating machine? Let's talk about a few.

 

1. High impurity removal power

 

The material layer between the polyester mesh and the roller is very thin, the distance of impurities in the pulp is short, the negative effect from the pulp layer is small, and the centrifugal force caused by high-speed work makes the filler, ink particles and other fine impurities easy to come out, and the ash removal rate of the pulp after washing is very high.

 

2. High dehydration power

 

The thin pulp layer and high centrifugal force are not only beneficial to the removal of fine impurities, but also to the removal of water. The equipment has low pulp concentration and high pulp concentration, which makes the dewatering rate of washed pulp very high.

 

3. After washing, the pulp quality is even

 

The lower pulp concentration and the uniform distribution of the pulp feeding system make the pulp evenly distributed in any direction. In addition, the stable squeezing force and centrifugal force in the dehydration process make the pulp have the uniform and common dehydration power all the time, so the pulp quality is uniform and stable.

 

4. Small floor area, large production capacity

 

Although the thickness of the material layer is very small, the high speed of the equipment determines that the production capacity per unit area is appropriately high. Therefore, with the same production capacity, the floor area is much smaller.

 

5. Low power consumption and low installation cost

 

Compared with the horizontal belt washer, the vacuum pump is omitted and the power consumption is reduced. Compared with the vacuum washer, the cost of the device is reduced. The washing and dewatering effect of the device is much better than any other equipment including the two.

 

6. Simple operation, saving manpower

 

The equipment has a high degree of automation, normal work, no need for human operation. The polyester net with guide bar saves the risk of net deviation. The well-designed cantilever net changing structure makes the net changing operation more simple and convenient, saves time and labor, and improves the use power of the equipment.

 

7. Clean environment and safe work

 

The fully enclosed structure design makes the water and dehydrated slurry discharged uniformly after gathering inside the equipment, without any impact on the external environment. It adheres to the cleanliness of the working environment, and makes the high-speed working parts completely separated from the operators, so as to eliminate the hidden danger of safety.