What is the juicing principle of passion fruit Juicer
Time：2021-04-07 13:48 Browse：277
Main structure principle of passion fruit Juicer
The main component of passion fruit juicer is that the pulp, juice and skin of the de nucleated fruit enter the screw Juicer through the bucket. The bottom diameter of the screw increases gradually along the direction of the slag outlet, while the pitch decreases gradually. When the material is pushed by the screw, the volume of the screw cavity decreases, forming the compression of the material. The rolling direction of the screw spindle of Jingjiang Weineng machinery is clockwise from the feeding hopper to the slag trough. The material enters into the feeding hopper and is pressed under the push of the screw. The squeezed juice flows into the juice container at the bottom through the filter screen, while the waste material is discharged through the annular space formed between the screw and the pressure regulating conical part. The size of the space can be adjusted by moving the pressure regulating head along the axial direction. It is used in clockwise direction (when the bearing seat of rolling hand wheel is viewed from the slag chute of the equipment to the feed hopper end, the pressure regulating head is to the left, and the empty space is reduced, otherwise, the empty space is increased.) Changing the size of the empty space, that is, adjusting the resistance of the slag discharge, can change the slag rate. But if the empty space is too small, under the strong extrusion, some slag particles and juice will be extruded through the filter together. Although the juice is added, the quality of the juice is relatively reduced. The size of the empty space should depend on the user's detailed process requirements. And then reach the intention that juice and dregs take the initiative to leave.
