The screw juicer is mainly composed of front support, screw shaft, feed hopper, filter screen, juice container, post production, slag trough and other components. The left end of the screw spindle is supported in the rolling bearing seat, and the right end is supported in the handwheel bearing seat. The motor drives the screw shaft to run through a pair of belt pulleys. It is suitable for squeezing and extracting juice of tomato, carrot, pineapple, apple, aloe, grape, orange and other fruits and vegetables. It is pushed by screw shaft, and has the functions of crushing, squeezing and slag discharging. Screw juicer is mainly used for pressing fruit and vegetable juice.

 

The main component is that the screw increases gradually along the bottom diameter and the pitch decreases gradually. When the material is pushed by the screw, the material is squeezed due to the reduction of the volume of the screw cavity. The raw material is added into the feeding hopper and pressed under the push of the screw. The squeezed juice flows into the juice container at the bottom through the filter screen, while the waste material is discharged through the annular gap formed between the screw and the pressure regulating conical part. The movement of the pressure regulating head along the axial direction can adjust the size of the gap and the juice yield.

 

The working principle of screw Juicer of Jingjiang Weineng machinery: the screw shaft rotates clockwise, the bottom diameter gradually increases and the screw pitch gradually decreases. When the material is pushed by the screw shaft, the screw cavity gradually decreases, thus forming the pressing of the material. Fruit and vegetable products are added into the hopper. Under the push and extrusion of the screw shaft, the squeezed juice flows into the juice container at the bottom through the filter screen, and the slag is discharged by the annular gap formed between the screw shaft and the cone-shaped part of the pressure regulator. The pressure regulator can adjust the gap size to adjust the resistance of slag discharge, which can change the slag yield. The gap size of the pressure regulator should depend on the processing conditions of the processed fruit and vegetable products It's up to you.