Equipment structure and operation principle of fruit and veg
Time：2021-04-07 15:09 Browse：277
Structure and principle of fruit and vegetable juicer
It is composed of front support seat, feeding hopper, screw, filter screen, juice container, rear support, slag trough and other parts. The left end of screw spindle is supported in rolling bearing seat, the right end is supported in handwheel bearing seat, and the motor drives screw through a pair of V-belt pulley.
Juicing: the main component is that the pulp, juice and peel after the core removal enter the screw Juicer through the bucket. From the screw, the bottom diameter of the screw gradually increases along the direction of the slag outlet, while the pitch gradually decreases. When the material is pushed by the screw, the volume of the screw cavity decreases, forming the pressing of the material. The rotation direction of the screw spindle is clockwise from the hopper to the slag groove. The raw material is added into the feeding hopper and pressed under the push of the screw. The squeezed juice flows into the juice container at the bottom through the filter screen, while the waste material is discharged through the annular gap formed between the screw and the pressure regulating conical part. The size of the gap can be adjusted by the movement of the pressure regulating head along the axial direction.
