The brake equipment of plate conveyor hoist is flexible and reliable, and its limit clamping equipment shall be able to independently accept the strong wind force under the operation state without being blown by the wind. The frame equipment of the chain conveyor starts from the head frame, then the intermediate frame of each section is installed in turn, and the tail frame is installed at the back. According to the relevant rules and principles, we produce chain plate conveyor is to choose the standard roof chain as the bearing surface, the motor reducer as the power transmission, supporting in the special guide rail. Before using, we should grasp some basic application common sense. In the process of using chain plate conveyor, we need to pay attention not to touch with acid and alkali, oil, water and other pollutants, and keep away from the heat source The storage temperature should be between - 10 ℃ and 40 ℃. In addition, we need to grasp the following basic knowledge:

(1) In the application of chain conveyor, it is forbidden to connect different types and standards of belts together.

 

(2) Avoid folding and hard objects pressing in use. It should be taken up, used and kept.

 

(3) The direction of material delivery and the speed of material falling cooperate with the belt direction and speed.

 

(4) Before operation, the machine is usually started empty to avoid overload of the motor and slippage of the conveyor belt. Before shutdown, all the materials in the belt should be unloaded.

 

(5) In operation, the tension should not be too large, and should not slip with the transmission roller and the material is not transitional, so as to ensure the operation under small tension.

 

(6) The belt of plate conveyor should not deviate or run in a serpentine way during transportation. It should be adjusted in time.

 

(7) In case of slippage or immobility in operation, it is necessary to eliminate the fault in time, adjust the tension system and insist on the sensitivity of the tension equipment.