The universal pulverizer is composed of three parts: the main machine, the auxiliary machine and the electric control box. It has many functions, such as air separation, no screen, no net, uniform particle size and so on. The production process is continuous. During the damage operation, the main engine has low temperature, strong damage ability and low vulnerability. The data were transported to the all-round destructor by negative pressure after the coarse damage, and the data of traditional Chinese medicine were completed to the end of the ultra-fine damage. Because of its high damage fineness, it can reach the level of cell wall breaking, so it is more widely used in drug research and clinical application, and the market of this kind of machine is also booming.

 

The equipment of Jingjiang Weineng machinery uses the high-speed relative motion of the movable and fixed toothed discs, so that the damaged objects can be damaged by the inductive effect of tooth impact, conflict and material impact. It has been widely used in chemical, pharmaceutical, food, construction, metallurgy and other fields.

 

Introduction to matters needing attention in the operation of all-round destructor:

 

1. Before use, check whether the fasteners of the machine are tightened and whether the belt is tight.

 

2. Check whether the electrical equipment is complete.

 

3. The operation direction of the spindle needs to be the same as the direction of the arrow on the protective cover, otherwise it will damage the machine and cause personal injury.

 

4. Check whether there are metal and other hard debris in the grinding room of the machine tool, otherwise it will damage the tool and affect the operation of the machine tool.

 

5. The oil cup on the machine should always be filled with lubricating oil to ensure the normal operation of the machine.

 

6. The purity of the data should be checked before damage, and the metal and hard debris should not be mixed to prevent damage or burning.

 

7. Stop feeding before shutdown. If it is not used continuously, the residue in the machine needs to be removed.

 

8. There are slight oscillations during operation. In order to prevent accidents, it is necessary to tighten the cover connecting handle.

 

9. Check whether the cutter and screen are damaged regularly. If there is any damage, please replace it immediately.

 

The above is all the content that Xiaobian brings to us today. I hope you can have a better understanding of this product.