Stainless steel strawberry beater
Time：2021-04-07 15:39 Browse：277
1. Strawberry beating machine structure:
It is composed of front support, feed hopper, crusher, screw, filter screen, juice container, rear support, slag trough and other parts. The left end of the screw spindle is supported in the rolling bearing seat, the right end is supported in the handwheel bearing seat, and the motor drives the screw to work through a pair of V-belt pulley.
2. Working principle of strawberry beater
Strawberry beating machine is through the rapid cutting of multiple knife groups to break, can make onion powder, mashed potatoes, mashed garlic (minced garlic), minced vegetables and so on, a variety of fruits and vegetables into minced or into juice. The machine is wear-resistant and durable, and meets the food hygiene standard. Simple operation, convenient cleaning, safe and reliable. Suitable for catering industry, hotels, canteens, food processing plants and other units.
The main component of Jingjiang Weineng mechanical strawberry beating machine is the screw, which gradually increases the bottom diameter along the direction of the slag outlet, and gradually reduces the pitch. When the material is pushed by the screw, the volume of the screw cavity is reduced, forming the pressing of the material. The rotation direction of the screw spindle is clockwise from the hopper to the slag groove. The material enters into the feeding hopper and is pressed under the push of the screw. The squeezed juice flows into the juice container at the bottom through the filter screen, while the waste material is discharged through the annular space formed between the screw and the pressure regulating conical part. The size of the space can be adjusted by moving the pressure regulating head along the axial direction. It is used in clockwise direction (when the bearing seat of hand wheel is rolled from the slag chute of the equipment to the hopper end, the pressure regulating head is left, and the empty space is reduced, otherwise, the empty space is increased.) Change the size of the open space, that is, adjust the resistance of slag discharge. But if the space is too small, under the strong extrusion, part of the slag particles will be extruded together with the juice through the filter screen. Although the juice is added, the quality of the juice is relatively low. The size of the space should depend on the detailed process requirements of users. Stainless steel spiral fruit and vegetable juicer is suitable for beating a variety of fresh fruits and vegetables. Products such as orange, grape, Macadamia, mulberry, Bayberry and honey peach can be made into jam juice and separated from kernel, seed and thin skin. Vegetables can also be made into jam juice and vegetable gluten. It is an ideal machine for making jam, juice and vegetable juice and an important equipment for food processing enterprises Prepare.
The motor drives the spindle to rotate through a pair of pulleys. The tripod is installed on the spindle, the beating plate is on the tripod, and the screen, funnel and slag are installed on the bracket. The upper inner cylinder and the feeding hopper are loaded on the bracket, and the whole upper bracket is connected by hinges, which can be opened to check the quality of pulp.
The touching part with material is made of 304 stainless steel.
National standard 304 stainless steel can be selected as the raw material of the rack, which depends on the customer's requirements.
