1. This product is a multi-functional vegetable cutter, with cutting head, four knives including knife, curve, square and diamond, and two knives without cutting head. It is suitable for processing hard and soft root, stem, leaf vegetables and kelp. It can be cut into pieces, pieces, silk, dice, diamond and curve shapes.

 

Centrifugation slice thickness 2-10 mm adjustable

 

The slicing thickness of conveyor belt is adjustable from 1 mm to 25 mm

 

Diamond blade cutting thickness: 16mm

 

The width of dice blade: 19mm1. Try to cut before operation, and observe whether the specifications of the cut vegetables are the same as the required specifications. Otherwise, the slice thickness or broken length should be adjusted, and the normal operation should be carried out after meeting the requirements.

 

2. Installation of vertical knife

 

First, roll the adjustable eccentric wheel to make the tool rest move to the bottom dead center, then lift the tool rest up 1 / 2 mm to make the vertical knife contact with the conveyor belt, and fasten the vertical knife on the tool rest with the fastening nut. Explanation: the lifting height of knife rest can be controlled by oneself according to the vegetables cut. If the elevated height is small, vegetables may be even knife, if the elevated height is too high, it may cut the conveyor belt.

 

3. Crushing length adjustment

 

 

Roll the adjustable eccentric, loosen the connecting rod fastening screw, cut the thin wire to move the fulcrum from the outside to the inside; cut the thick wire to move the fulcrum from the inside to the outside, and tighten the adjusting screw after adjustment.

 

Cabbage crusher

 

4. Slice thickness adjustment

 

According to the structure of the section tissue, the appropriate adjustment method was selected.

 

Clarify: the gap between the blade and the dial plate should be 0.5-1 mm, otherwise the crushing quality will be affected.

 

5. Speed adjustment

 

Tension of V-belt: to ease the tension of V-belt, the adjusting screw at the rear of the machine can be adjusted, and the tension can be achieved by clockwise rotation; the motor plate nut can be adjusted by slicing tissue tension to achieve the purpose of tension.

 

6. When crushing, clean the vegetables to avoid mixing foreign matters in the vegetables and damaging the cutting tools and other parts.