Stainless steel passion fruit pulp seed separator
Time：2021-04-13 07:43 Browse：277
1、 Structure characteristics and working principle of passion fruit Juicer:
The machine is mainly composed of three counter pressure rolls, two knife rolls, one material transfer roll, feed hopper, slurry hopper, leather hopper, frame, transmission and other parts. When working, the power is turned on and the material is poured into the hopper. The material first passes through the middle of the two knife rollers and is pressed into the middle of the two knife rollers through the material pulling roller to cut. The passion fruit with seed slurry is discharged from the pulp hopper, and the peel is further pressed by three pressure rollers and discharged from the leather hopper, so as to achieve the purpose of pulp collection;
2、 Structure and raw material introduction:
The machine is mainly composed of frame, fruit cutter, pulp scraper, skin hopper, pulp outlet, transmission part, etc. when working, the fruit is manually placed at the entrance section of the fruit cutter, and then the passion fruit after the section is placed on the pulp scraper to stop digging, so as to get passion fruit with seed slurry. Except for the transmission part, the machine is made of stainless steel, and the blade is made of high-speed steel.
3、 Characteristics of passion fruit Juicer of Jingjiang Weineng machinery
Baixiangguo Juicer uses stainless steel raw materials, Seiko motor. It can dig about 600 Jin of pulp per day. It is simple, safe and hygienic to open the mouth, dig the bag and collect the pulp. After three years of deposit transformation, the machine can dig large and small fruits. Welcome to use
