Brief introduction of structure and principle of stainless s
Time：2021-04-14 11:14 Browse：277
Structure and working principle of stainless steel beating machine
The main shaft drives the impeller to rotate at high speed, and the material is driven by the impeller to rub and squeeze with the screen, so that the juice is separated from the skin and the seed. Meat and juice enter the secondary material barrel through the small holes on the screen, while the skin and seeds are pushed to the shaft end and discharged through the slag outlet. The structure of the secondary material barrel is the same as that of the head channel, except that the mesh diameter of the secondary screen is smaller and the spindle speed is higher. The equipment mainly includes: spindle components, automatic cleaning components, screen components, waterway system and electrical system. Spindle components mainly include bearing box and impeller.
1. The machine is composed of upper shell, lower shell, discharge port, feed hopper, angle steel frame, hammer piece, cutting tool, etc.
2. When crushing, the size of the crushing material is controlled by the size of the screen hole, and different screens can be changed.
3. When cutting grass alone, the screen can be pulled out.
4. When beating, change the special sieve for beating.
