Multi function Citrus Juicer is suitable for citrus, lemon, orange, pineapple, lime, grapefruit, grapefruit and other citrus fruits, directly from 25 mm to 140 mm, no need to peel, no need to grade, direct juicing. The machine is mainly composed of feeding port, pressure roller, cutter, scraper, cutter, brush roller, cutter clearance adjusting device, juice outlet, frame, transmission mechanism, leather screw conveyor, slag screw conveyor, etc.

 

Introduction of multifunctional citrus juice products:

 

This machine is suitable for orange, lemon, orange, pineapple, lime, grapefruit, grapefruit and other citrus fruits, directly from 25 mm to 140 mm, without peeling, grading, direct juicing.

 

The machine is mainly composed of feeding port, pressure roller, cutter, scraper, cutter, brush roller, cutter clearance adjusting device, juice outlet, frame, transmission mechanism, leather screw conveyor, slag screw conveyor, etc.

 

Its main working principle is: turn on the power, pour the material into the feed port, fruit from the hopper to the middle of the pressure roller, the pressure roller rotates in the opposite direction, there is a punch on the surface of the pressure roller. According to the friction of the knife tip, the fruit is pressed into a lower gap from the middle gap of the pressure roller, and the fruit is cut into two parts under the action of the pressure roller and the cutting knife. Driven by the rotation of the press roll, the gap between the two press rolls and the electric arc screen under the press roll decreases gradually. Under the action of the press roll, the fruit is squeezed, the juice is extruded from the juice collecting tank through the sieve hole, and the juice is discharged from the juice outlet. The gap adjusting device of the cutting knife can adjust the up and down of the arc screen to control the juice output of the fruit. There are cutting knives on both sides of the arc screen (the cutting knives can be adjusted up and down to control the proportion of the exocarp and the remaining pulp). The remaining pulp can be divided into the exocarp and the residual pulp of the fruit. The remaining pulp can be discharged into the slag screw conveyor with the filter screen, and the exocarp on the top of the pressure roller can be scraped off by the scraper and discharged into the peel screw conveyor.