Working principle of brush cleaning machine: working condition and non working condition should be treated separately. Before operation, carefully read the manual of the brush type cleaning machine, and try to operate according to its requirements, and then check whether the articles are properly put into the brush type cleaning machine for cleaning, so as to ensure that there are no metal, coins, keys and other hard objects inside, and pull up the zipper to avoid damage to the brush type cleaning machine. It should be noted that the washed clothes should not exceed the capacity of the brush type cleaning machine, because it is too heavy, the burden of the motor will be added, or the belt will crack, which will reduce the service life of the brush type cleaning machine. In the non operation condition, it is necessary to adhere to the dryness of the brush cleaning machine, dry the shell, open the door cover, and let the water transpiration, while the brush cleaning machine can not accumulate heavy objects and hot items on the top cover. And the brush type cleaning machine should be placed in a dry and ventilated place, the position should be stable, away from gasoline, alcohol and other inflammables.

 

The protection method of Jingjiang Weineng machinery is as follows:

 

1. Whether the switch buttons are normal and useful; whether the appearance of the digital display (such as height, temperature and speed) is consistent with the practice; whether the switch signs are blurred and dropped.

 

2. Whether the emergency stop switch and sensor are normal; whether there are sundries and dirt on the rolling rod; whether the small rubber ring on the rolling rod is worn, aged and dropped.

 

3. Check the wear and aging degree of rubber rolling rod and small rubber ring, and evaluate whether it affects the normal cleaning and product quality (especially the coated products). If the cleaning effect fails to meet the product quality requirements, make records, inform the mechanical and electrical repair department to replace, and then clean the rolling rod.

 

4. Check whether the brush and sponge rod are deformed and aged; check whether the small hole of shower pipe is blocked; check the rolling rod as above.

 

5. Whether the emergency stop switch and sensor are normal and useful; the maintenance content of rolling rod is the same as above; whether there are dust and stolen goods in the fan and heating and drying section

 

Application of brush type cleaning machine:

 

Cleaning, impurity removal, transportation, selection and desalting of some leaves, fungi and pickled vegetables. Instead of heavy physical labor, he completed the mechanization of agricultural products processing. The roller shaft is generally made of 45 ° round steel, and the bristles are mostly made of nylon, which is acid and alkali resistant. If the glass cleaning line needs to be cleaned with acid solution, it is necessary to use all stainless steel brush roller to avoid corrosion. Generally, the brush is made of strip brush machine and then spiral welded on the roller shaft; the water absorption roller is made of sponge with high density hydrophilic molecules, which has good water absorption performance and is dry and fast, and is used to completely and quickly dry the water drops on the surface of glass.