Principle and characteristics of fig beater
Time：2021-04-07 14:33 Browse：277
Beating machine manufacturers spot supply - fig beating machine - Mango beating machine - Strawberry beating machine - Pineapple beating machine
Before beating, the fig washing machine should be used to remove mud, debris and sterilization before beating. So what are the structural characteristics of fig beating machine? How does it do beating work? Next, Jingjiang Weineng mechanical beating machine manufacturers for you to do a detailed introduction.
1、 Application scope and characteristics
Fig beating machine is mainly used to separate pulp residue of broken or softened berries or nuts in large juice and jam factories.
Fig beating machine features:
1. Automatic separation of slurry and slag.
2. It can be combined on the production line and produced on a single machine.
3. The parts in contact with the materials are made of stainless steel, which meets the requirements of food hygiene.
2、 Working principle of fig beater
When the juice mixture enters the buffer chamber of the road beater from the feed port through the push pump, the juice mixture will be filled into the working chamber actively. Then, under the effect of the high-speed centrifugal force of the rotor, the juice and the fruit residue will be separated actively, and the juice will enter the buffer chamber through the filter screen to further refine the material. Slag is discharged from the back end of the filter screen because of the tangent principle of the filter screen and the effect of the rotor; the principle of the road beater is the same as that of the road beater, but the filter screen hole of the road beater is smaller than that of the road beater. The equipment is equipped with a dilution port on the upper part of the operation chamber. When the juice mixture is dense, the material can be diluted through the dilution port; when the beating machine is not in use, the residue in the buffer chamber can be discharged first, and then the door cover can be opened to clean the machine.
3、 Operation and application of fig beating machine and matters needing attention
1. Start up: before starting up, check whether the connection of rolling parts is firm and firm, whether the motor steering and signs are common, check whether all the screws of the machine are loose, whether the door cover bolts are tight, and check whether they are not loose before starting up. Then the material is added for beating.
2. Stop: after the motor stops, pull the main switch. Do not open the door cover when the rotor does not stop rolling. The door cover can be opened by rolling the hand wheel counterclockwise.
3. Oil the bearing regularly to extend its service life.
4. After each shift, it is necessary to clean and maintain the machine to prevent the material from fermenting in the machine. When cleaning, open the door cover and remove the screen framework before removing the rotor parts.